A survey of additive manufacturing reviews

Xiaoya Zhai, Liuchao Jin, Jingchao Jiang

Article ID: 21
Vol 1, Issue 4, 2022, Article identifier:21

Abstract


Nowadays, additive manufacturing (AM) technologies have been widely used in construction, medical, military, aerospace, fashion, etc. The advantages of AM (e.g., more design freedom, no restriction on the complexity of parts, and rapid prototyping) have attracted a growing number of researchers. Increasing number of papers are published each year. Until now, thousands of review papers have already been published in the field of AM. It is, therefore, perhaps timely to perform a survey on AM review papers so as to provide an overview and guidance for readers to choose their interested reviews on some specific topics. This survey gives detailed analysis on these reviews, divides these reviews into different groups based on the AM techniques and materials used, highlights some important reviews in this area, and provides some discussions and insights.


Keywords


Additive manufacturing; 3D printing; Review

Full Text:

Full-Text

References


Gibson I, Rosen DW, Stucker B, et al., 2021, Additive Manufacturing Technologies. 3rded. Berlin: Springer.

International Organization for Standardization/ASTM52900, 2021, Additive manufacturing-General principles- Terminology. West Conshohocken, PA: ASTM International.

Jiang J, Xu X, Stringer J, 2019, Optimization of process planning for reducing material waste in extrusion based additive manufacturing, robot. Comput Integr Manuf, 59: 317–325. https://doi.org/10.1016/j.rcim.2019.05.007

Kabir SM, Mathur K, Seyam AF, 2020, A critical review on 3D printed continuous fiber-reinforced composites: History, mechanism, materials and properties. Compos Struct, 232: 111476. https://doi.org/10.1016/J.COMPSTRUCT.2019.111476

Zhuo P, Li S, Ashcroft IA, et al., 2021, Material extrusion additive manufacturing of continuous fibre reinforced polymer matrix composites: A review and outlook, Compos Part B Eng, 224: 109143. https://doi.org/10.1016/J.COMPOSITESB.2021.109143

Goh GD, Neo SJ, Dikshit V, et al., 2021, Quasi-static indentation and sound-absorbing properties of 3D printed sandwich core panels. 24: 1206–1225. https://doi.org/10.1177/10996362211037015

Stratasys, 2017, United States: Stratasys. Avaialble from: https://www.investors.stratasys.com/news-events/press-releases/detail/418/inventor-of-fdm-3d-printing-and-co-founder-of-stratasys [Last accessed on 2018 Dec 09].

Jiang J, Xu X, Stringer J, 2019, Effect of Extrusion Temperature on Printable Threshold Overhang in Additive Manufacturing. In: 52nd CIRP Conference on Manufacturing Systems, Ljubljana.

Jiang J, Xu X, Stringer J, 2018, Support structures for additive manufacturing: A review. J Manuf Mater Process, 2: 64. https://doi.org/10.3390/jmmp2040064

Thompson SM, Bian L, Shamsaei N, et al., 2015, An overview of direct laser deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics. Addit Manuf, 8: 36–62. https://doi.org/10.1016/J.ADDMA.2015.07.001

Beaman JJ, Deckard CR, 1991, Selective Laser Sintering with Assisted Powder Handling. Available from: https://www. patents.google.com/patent/US4938816A/en [Last accessed on 2018 Dec 09].

Bertrand P, Bayle F, Combe C, et al., 2007, Ceramic components manufacturing by selective laser sintering. Appl Surf Sci, 254: 989–992. https://doi.org/10.1016/j.apsusc.2007.08.085

Deckers J, Shahzad K, Vleugels J, et al., 2012, Isostatic pressing assisted indirect selective laser sintering of alumina components. Rapid Prototyp J, 18: 409–419. https://doi.org/10.1108/13552541211250409

Mahmoud D, Elbestawi MA, 2019, Selective laser melting of porosity graded lattice structures for bone implants. Int J Adv Manuf Technol, 100: 2915–2927. https://doi.org/10.1007/s00170-018-2886-9

Coeck S, Bisht M, Plas J, et al., 2019, Prediction of lack of fusion porosity in selective laser melting based on melt pool monitoring data. Addit Manuf, 25: 347–356. https://doi.org/10.1016/J.ADDMA.2018.11.015

Kruth JP, Wang X, Laoui T, et al., 2003, Lasers and materials in selective laser sintering. Assem Autom, 23L 357–371. https://doi.org/10.1108/01445150310698652

Siddiqui SF, Fasoro AA, Cole C, et al., 2019, Mechanical characterization and modeling of direct metal laser sintered stainless steel GP1. J Eng Mater Technol, 141: 031009. https://doi.org/10.1115/1.4042867

Jiazhu W, Liu T, Chen H, et al., 2019, Simulation of laser attenuation and heat transport during direct metal deposition considering beam profile. J Mater Process Technol, 270: 92–105. https://doi.org/10.1016/J.JMATPROTEC.2019.02.021

Nahmany M, Hadad Y, Aghion E, et al., 2019, Microstructural assessment and mechanical properties of electron beam welding of AlSi10Mg specimens fabricated by selective laser melting. J Mater Process Technol, 270: 228–240. https://doi.org/10.1016/J.JMATPROTEC.2019.02.025

Kruth JP, Mercelis P, Van Vaerenbergh J, et al., 2005, Binding mechanisms in selective laser sintering and selective laser melting. Rapid Prototyp J, 11: 26–36. https://doi.org/10.1108/13552540510573365

Murr LE, Gaytan SM, Ramirez DA, et al., 2012, Metal fabrication by additive manufacturing using laser and electron beam melting technologies. J Mater Sci Technol, 28: 1–14. https://doi.org/10.1016/S1005-0302(12)60016-4

Yang J, Ouyang H, Wang Y, 2010, Direct metal laser fabrication: Machine development and experimental work. Int J Adv Manuf Technol, 46: 1133–1143. https://doi.org/10.1007/s00170-009-2174-9

Shellabear M, Nyrhilä O, 2004, DML-Development History and State of the Art. In: Proceeding 4th Laser Assisted Net Shape Engineering Conference. (LANE 2004). pp. 21–24. https://doi.org/10.1016/j.molmed.2015.05.003

Calvert P, 2001, Inkjet printing for materials and devices. Chem Mater, 13: 3299–3305. https://doi.org/10.1021/cm0101632

de Gans BJ, Duineveld PC, Schubert US, et al., 2004, Inkjet Printing of Polymers: State of the Art and Future Developments. Germany: WILEY‐VCH Verlag. https://doi.org/10.1002/adma.200300385

Blazdell PF, Evans JR, 2000, Application of a continuous ink jet printer to solid freeforming of ceramics. J Mater Process Technol, 99: 94–102. https://doi.org/10.1016/S0924-0136(99)00392-1

Slade CE, Evans JR, 1998, Freeforming ceramics using a thermal jet printer. J Mater Sci Lett, 17: 1669–1671. https://doi.org/10.1023/A:1006666718653

Elliott AM, Ivanova OS, Williams CB, 2013, Inkjet printing of quantum dots in photopolymer for use in additive manufacturing of nanocomposites. Adv Eng Mater, 15: 903–907. https://doi.org/10.1002/adem.201300020

Ko SH, Chung J, Hotz N, et al., 2010, Metal nanoparticle direct inkjet printing for low-temperature 3D micro metal structure fabrication. J Micromech Microeng, 20: 125010. https://doi.org/10.1088/0960-1317/20/12/125010

Polozov I, Sufiiarov V, Shamshurin A, 2019, Synthesis of titanium orthorhombic alloy using binder jetting additive manufacturing. Mater Lett, 243: 88–91. https://doi.org/10.1016/J.MATLET.2019.02.027

Snelling D, Blount H, Forman C, et al., 2013, The effects of 3D pritned molds on metal castings. 2013 International Solid Freeform Fabrication Symposium, 827–845.

Williams CB, Cochran JK, Rosen DW, 2011, Additive manufacturing of metallic cellular materials via three-dimensional printing. Int J Adv Manuf Technol, 53: 231–239. https://doi.org/10.1007/s00170-010-2812-2

Lam CX, Mo XM, Teoh SH, et al., 2002, Scaffold development using 3D printing with a starch-based polymer. Mater Sci Eng C, 20: 49–56. https://doi.org/10.1016/S0928-4931(02)00012-7

Yoo J, Cima MJ, Khanuja S, et al., 1993, Structural Ceramic Components by 3D Printing. In: International Solid Freeform Fabrication Symposium, University of Texas at Austin.

Eisenbarth D, Esteves PM, Wirth F, et al., 2019, Spatial powder flow measurement and efficiency prediction for laser direct metal deposition. Surf Coatings Technol, 362: 397–408. https://doi.org/10.1016/J.SURFCOAT.2019.02.009

Sandia National Laboratories, 1997, Creating a Complex Metal Part in a Day is Goal of Commercial Consortium. Available from: https://www.sandia.gov/media/lens.htm [Last accessed on 2018 Dec 09].

Griffith ML, Harwell LD, Romero J, et al., 1997, Multi-material Processing by LENS. In: Solid Freeform Fabrication Symposium Conference. Austin Texas. pp. 11–13. https://doi.org/10.2966/scrip.040407.436

Griffith ML, Ensz MT, Puskar JD, et al., 2000, Understanding the Microstructure and Properties of Components Fabricated by Laser Engineered Net Shaping (LENS). In: MRS Proceeding. Cambridge: Cambridge University Pressp. pp9. https://doi.org/10.1557/PROC-625-9

Taminger KM, Hafley RA, 2006, Electron Beam Freeform Fabrication for Cost Effective Near-Net Shape Manufacturing. In: NATO/RTO AVT-139 Spec. Meet Cost Effective Manufacturing. via Net Shape Process. Amsterdam. Available from: https://www.ntrs.nasa.gov/ search.jsp?R=20080013538 [Last accessed on 2018 Dec 09].

Weng F, Gao S, Jiang J, et al., 2019, A novel strategy to fabricate thin 316L stainless steel rods by continuous direct metal deposition in Z direction. Addit Manuf, 27: 474–481. https://doi.org/10.1016/j.addma.2019.03.024

Jiang J, Weng F, Gao S, et al., 2019, A support interface method for easy part removal in direct metal deposition. Manuf Lett, 20: 30–33. https://doi.org/10.1016/j.mfglet.2019.04.002

Aduba DC, Margaretta ED, Marnot AE, et al., 2019, Vat photopolymerization 3D printing of acid-cleavable PEG-methacrylate networks for biomaterial applications. Mater Today Commun, 19: 204–211. https://doi.org/10.1016/J.MTCOMM.2019.01.003

Cooper KG, 2001, Rapid prototyping technology: Selection and application. Assem Autom, 21: 358–359. https://doi.org/10.1108/aa.2001.21.4.358.1

Pham DT, Ji C, 2000, Design for stereolithography. Proc Inst Mech Eng Part C J Mech Eng Sci, 214: 635–640. https://doi.org/10.1243/0954406001523650

Himmer T, Nakagawa T, Anzai M, 1999, Lamination of metal sheets. Comput Ind, 39: 27–33. https://doi.org/10.1016/S0166-3615(98)00122-5

Nohut S, Schwentenwein M, 2022, Vat photopolymerization additive manufacturing of functionally graded materials: A review. J Manuf Mater Process, 6: 17. https://doi.org/10.3390/JMMP6010017

Xu X, Awad A, Robles-Martinez P, et al., 2021, Vat photopolymerization 3D printing for advanced drug delivery and medical device applications. J Control Release, 329: 743–757. https://doi.org/10.1016/J.JCONREL.2020.10.008

Luo Z, Zhao Y, 2018, A survey of finite element analysis of temperature and thermal stress fields in powder bed fusion additive manufacturing. Addit Manuf, 21: 318–332. https://doi.org/10.1016/J.ADDMA.2018.03.022

McCann R, Obeidi MA, Hughes C, et al., 2021, In-situ sensing, process monitoring and machine control in laser powder bed fusion: A review. Addit Manuf, 45: 102058. https://doi.org/10.1016/J.ADDMA.2021.102058

Wickramasinghe S, Do T, Tran P, 2020, FDM-Based 3D printing of polymer and associated composite: A review on mechanical properties, defects and treatments. Polymers, 12: 1529. https://doi.org/10.3390/POLYM12071529

Dey A, Yodo N, 2019, A systematic survey of FDM process parameter optimization and their influence on part characteristics. J Manuf Mater Process, 3: 64. https://doi.org/10.3390/JMMP3030064

Ziaee M, Crane NB, 2019, Binder jetting: A review of process, materials, and methods. Addit Manuf, 28: 781–801. https://doi.org/10.1016/J.ADDMA.2019.05.031

Pagac M, Hajnys J, Ma QP, et al., A review of vat photopolymerization technology: Materials, applications, challenges, and future trends of 3D printing. Polymers,13: 598. https://doi.org/10.3390/POLYM13040598.

Gülcan O, Günaydın K, Tamer A, 2021, The state of the art of material jetting-a critical review. Polymers(Basel), 13: 2829. https://doi.org/10.3390/POLYM13162829

Grasso M, Colosimo BM, 2017, Process defects and in situ monitoring methods in metal powder bed fusion: A review. Meas Sci Technol, 28: 044005. https://doi.org/10.1088/1361-6501/AA5C4F

Dass A, Moridi A, 2019, State of the art in directed energy deposition: From additive manufacturing to materials design. Coatings, 9: 418. https://doi.org/10.3390/COATINGS9070418

Ahn DG, 2021, Directed energy deposition (DED) process: State of the art. Int J Precis Eng Manuf Technol, 8: 703–742. https://doi.org/10.1007/S40684-020-00302-7

Chartrain NA, Williams CB, Whittington AR, 2018, A review on fabricating tissue scaffolds using vat photopolymerization. Acta Biomater, 74: 90–111. https://doi.org/10.1016/J.ACTBIO.2018.05.010

Andreu A, Su PC, Kim JH, et al., 2021, 4D printing materials for vat photopolymerization. Addit Manuf, 44: 102024. https://doi.org/10.1016/J.ADDMA.2021.102024

Maurel A, Martinez AC, Grugeon S, et al., 2021, Toward high resolution 3D Printing of shape-conformable batteries via vat photopolymerization: Review and perspective. IEEE Access, 9: 140654–140666. https://doi.org/10.1109/ACCESS.2021.3119533

Shaukat U, Rossegger E, Schlögl S, 2022, A review of multi-material 3D Printing of functional materials via vat photopolymerization. Polymers, 14: 2449. https://doi.org/10.3390/POLYM14122449

Bartlett JL, Li X, 2019, An overview of residual stresses in metal powder bed fusion. Addit Manuf, 27 (2019) 131–149. https://doi.org/10.1016/J.ADDMA.2019.02.020

Chatham CA, Long TE, Williams CB, A review of the process physics and material screening methods for polymer powder bed fusion additive manufacturing. Prog Polym Sci, 93: 68–95. https://doi.org/10.1016/J.PROGPOLYMSCI.2019.03.003

Aversa A, Marchese G, Saboori A, et al., 2019, New Aluminum alloys specifically designed for laser powder bed fusion: A review. Materials (Basel), 12: 1007. https://doi.org/10.3390/MA12071007

Dowling L, Kennedy J, O’Shaughnessy S, et al., 2020, A review of critical repeatability and reproducibility issues in powder bed fusion. Mater Des, 186: 108346. https://doi.org/10.1016/J.MATDES.2019.108346

Snow Z, Nassar AR, Reutzel EW, 2020, Invited review article: Review of the formation and impact of flaws in powder bed fusion additive manufacturing. Addit Manuf, 36: 101457. https://doi.org/10.1016/J.ADDMA.2020.101457

Awad A, Fina F, Goyanes A, et al., 2021, Advances in powder bed fusion 3D printing in drug delivery and healthcare. Adv Drug Deliv Rev, 174: 406–424. https://doi.org/10.1016/J.ADDR.2021.04.025

Mirzababaei S, Pasebani S, 2019, A review on binder jet additive manufacturing of 316L stainless steel. J Manuf Mater Process, 3: 82. https://doi.org/10.3390/JMMP3030082

Goh GD, Yap YL, Tan HK, et al., 2019, Process-structure-properties in polymer additive manufacturing via material extrusion: A review. Crit Rev Solid State Mater Sci, 45: 113–133. https://doi.org/10.1080/10408436.2018.1549977

Spoerk M, Holzer C, Gonzalez-Gutierrez J, 2020, Material extrusion-based additive manufacturing of polypropylene: A review on how to improve dimensional inaccuracy and warpage. J Appl Polym Sci, 137: 48545. https://doi.org/10.1002/APP.48545

Brenken B, Barocio E, Favaloro A, et al., 2018, Fused filament fabrication of fiber-reinforced polymers: A review. Addit Manuf, 21: 1–16. https://doi.org/10.1016/J.ADDMA.2018.01.002

Chaunier L, Guessasma S, Belhabib S, et al., 2018, Material extrusion of plant biopolymers: Opportunities and challenges for 3D printing. Addit Manuf, 21: 220–233. https://doi.org/10.1016/J.ADDMA.2018.03.016

Huang J, Chen Q, Jiang H, et al., 2020, A survey of design methods for material extrusion polymer 3D printing. Virtual Phys Prototyp, 15: 148–162. https://doi.org/10.1080/17452759.2019.1708027

Lamm ME, Wang L, Kishore V, et al., 2020, Material extrusion additive manufacturing of wood and lignocellulosic filled composites. Polymers (Basel), 12: 2115. https://doi.org/10.3390/POLYM12092115

Oleff A, Küster B, Stonis M, et al., 2021, Process monitoring for material extrusion additive manufacturing: A state-of-the-art review. Prog Addit Manuf, 64: 705–730. https://doi.org/10.1007/S40964-021-00192-4

Rowat SJ, Legge RL, Moresoli C, 2021, Plant protein in material extrusion 3D printing: Formation, plasticization, prospects, and challenges. J Food Eng, 308: 110623. https://doi.org/10.1016/J.JFOODENG.2021.110623

Saboori A, Aversa A, Marchese G, et al., 2019, Application of directed energy deposition-based additive manufacturing in repair. Appl Sci, 9: 3316. https://doi.org/10.3390/APP9163316

Tang ZJ, Liu WW, Wang YW, et al., 2020, A review on in situ monitoring technology for directed energy deposition of metals. Int J Adv Manuf Technol, 108: 3437–3463. https://doi.org/10.1007/S00170-020-05569-3

Xu J, Gu X, Ding D, et al., 2018, A review of slicing methods for directed energy deposition based additive manufacturing. Rapid Prototyp J, 24: 1012–1025. https://doi.org/10.1108/RPJ-10-2017-0196/FULL/PDF

Wang H, Liu W, Tang Z, et al., 2020, Review on adaptive control of laser-directed energy deposition. Optic Eng, 59: 070901. https://doi.org/10.1117/1.OE.59.7.070901

Kim KH, Jung CH, Jeong DY, et al., 2021, Preventing evaporation products for high-quality metal film in directed energy deposition: A review. Metals, 11: 353. https://doi.org/10.3390/MET11020353

Singh N, Hameed P, Ummethala R, et al., 2020, Selective laser manufacturing of Ti-based alloys and composites: Impact of process parameters, application trends, and future prospects. Mater Today Adv, 8: 100097. https://doi.org/10.1016/J.MTADV.2020.100097

Teixeira O, Silva FJ, Ferreira LP, et al., A review of heat treatments on improving the quality and residual stresses of the Ti-6Al-4V parts produced by additive manufacturing. Metals, 10: 1006. https://doi.org/10.3390/MET10081006

Frazier WE, 2014, Metal additive manufacturing: A review. J Mater Eng Perform, 23: 1917–1928. https://doi.org/10.1007/S11665-014-0958-Z/FIGURES/9

Sames WJ, List FA, Pannala S, et al., The metallurgy and processing science of metal additive manufacturing. 61 (2016) 315–360. https://doi.org/10.1080/09506608.2015.1116649

Deckers J, Vleugels J, Kruth JP, 2014, Additive manufacturing of ceramics: A review. J Ceram Sci Technol, 5: 245–260. https://doi.org/10.4416/JCST2014-00032

Sing SL, Yeong WY, Wiria FE, et al., 2017, Direct selective laser sintering and melting of ceramics: A review. Rapid Prototyp J, 23: 611–623. https://doi.org/10.1108/RPJ-11-2015-0178/FULL/PDF

Ligon SC, Liska R, Stampfl J, et al., 2017, Polymers for 3D printing and customized additive manufacturing. Chem Rev, 117: 10212–10290. https://doi.org/10.1021/ACS.CHEMREV.7B00074/ASSET/ IMAGES/LARGE/CR-2017-00074G_0037.JPEG

Kong D, Dong C, Wei S, et al., 2021, About metastable cellular structure in additively manufactured austenitic stainless steels. Addit Manuf, 38: 101804. https://doi.org/10.1016/J.ADDMA.2020.101804

Jin W, Zhang C, Jin S, et al., 2020, Wire arc additive manufacturing of stainless steels: A review. Appl Sci, 10: 1563. https://doi.org/10.3390/APP10051563

Attallah MM, Jennings R, Wang X, et al., 2016, Additive manufacturing of Ni-based superalloys: The outstanding issues. MRS Bull, 41: 758–764. https://doi.org/10.1557/MRS.2016.211

Shipley H, McDonnell D, Culleton M, et al., 2018, Optimisation of process parameters to address fundamental challenges during selective laser melting of Ti-6Al-4V: A review. Int J Mach Tools Manuf, 128: 1–20. https://doi.org/10.1016/J.IJMACHTOOLS.2018.01.003

Murphy SV, Atala A, 2014, 3D bioprinting of tissues and organs. Nat Biotechnol, 32: 773–785. https://doi.org/10.1038/nbt.2958

Buswell RA, de Silva WR, Jones SZ, et al., 2018, 3D printing using concrete extrusion: A roadmap for research. Cem Concr Res, 112: 37–49. https://doi.org/10.1016/J.CEMCONRES.2018.05.006

Parandoush P, Lin D, 2017, A review on additive manufacturing of polymer-fiber composites. Compos Struct, 182: 36–53. https://doi.org/10.1016/J.COMPSTRUCT.2017.08.088

Bandyopadhyay A, Heer B, Additive manufacturing of multi-material structures. Mater Sci Eng R Reports, 129: 1–16. https://doi.org/10.1016/J.MSER.2018.04.001

Perez AR, Roberson DA, Wicker RB, 2014, Fracture surface analysis of 3D-printed tensile specimens of novel ABS-based materials. J Fail Anal Prev, 14: 343–353. https://doi.org/10.1007/S11668-014-9803-9/FIGURES/14

Ilyas RA, Sapuan SM, Harussani MM, et al., 2021, Polylactic acid (PLA) biocomposite: Processing, additive manufacturing and advanced applications. Polymers, 13: 1326. https://doi.org/10.3390/POLYM13081326

Zanjanijam AR, Major I, Lyons JG, et al., Fused filament fabrication of PEEK: A review of process-structure-property relationships. Polymers, 12: 1665. https://doi.org/10.3390/POLYM12081665

Aboulkhair NT, Simonelli M, Parry L, et al., 2019, 3D printing of aluminium alloys: Additive manufacturing of aluminium alloys using selective laser melting. Prog Mater Sci, 106: 100578. https://doi.org/10.1016/J.PMATSCI.2019.100578

Tran TQ, Chinnappan A, Lee JK, et al., 2019, 3D printing of highly pure copper. Metals, 9: 756. https://doi.org/10.3390/MET9070756

Godoi FC, Prakash S, Bhandari BR, 3D printing technologies applied for food design: Status and prospects. J Food Eng, 179: 44–54. https://doi.org/10.1016/j.jfoodeng.2016.01.025

Mendes-Felipe C, Oliveira J, Etxebarria I, et al., 2019, State-of-the-art and future challenges of UV curable polymer-based smart materials for printing technologies. Adv Mater Technol, 4: 1800618. https://doi.org/10.1002/ADMT.201800618

Zhang D, Liu X, Qiu J, 2020, 3D printing of glass by additive manufacturing techniques: A review. Front Optoelectron, 14: 263–277. https://doi.org/10.1007/S12200-020-1009-Z

Madhavadas V, Srivastava D, Chadha U, et al., 2022, A review on metal additive manufacturing for intricately shaped aerospace components. CIRP J Manuf Sci Technol, 39: 18–36. https://doi.org/10.1016/J.CIRPJ.2022.07.005

Ramkumar P, Rijwani T, 2022, Additive manufacturing of metals and ceramics using hybrid fused filament fabrication. J Braz Soc Mech Sci Eng, 44: 1–17. https://doi.org/10.1007/S40430-022-03762-X/TABLES/1

Fu J, Li H, Song X, et al., 2022, Multi-scale defects in powder-based additively manufactured metals and alloys. J Mater Sci Technol, 122: 165–199. https://doi.org/10.1016/J.JMST.2022.02.015

Uralde V, Veiga F, Aldalur E, et al., 2022, Symmetry and its application in metal additive manufacturing (MAM). Symmetry, 14: 1810. https://doi.org/10.3390/SYM14091810

Muthuswamy P, 2022, Influence of powder characteristics on properties of parts manufactured by metal additive manufacturing. Lasers Manuf Mater Process, 9: 312–337. https://doi.org/10.1007/S40516-022-00177-3/FIGURES/12

Phua A, Davies CH, Delaney GW, 2022, A digital twin hierarchy for metal additive manufacturing. Comput Ind, 140: 103667. https://doi.org/10.1016/J.COMPIND.2022.103667

Zhou R, Liu H, Wang H, 2022, Modeling and simulation of metal selective laser melting process: A critical review. Int J Adv Manuf Technol, 121: 5693–5706. https://doi.org/10.1007/S00170-022-09721-Z/FIGURES/10.

Sefene EM, Hailu YM, Tsegaw AA, 2022, Metal hybrid additive manufacturing: State-of-the-art. Prog Addit Manuf, 7; 737–749. https://doi.org/10.1007/S40964-022-00262-1/TABLES/1

Zhang R, Jiang F, Xue L, Yu J, 2022, Review of additive manufacturing techniques for large-scale metal functionally graded materials. Crystals, 12: 858. https://doi.org/10.3390/CRYST12060858

Chaghazardi Z, Wüthrich R, 2022, Review-electropolishing of additive manufactured metal parts. J Electrochem Soc, 169: 043510. https://doi.org/10.1149/1945-7111/AC6450

Mostafaei A, Zhao C, He Y, et al., 2022, Defects and anomalies in powder bed fusion metal additive manufacturing. Curr Opin Solid State Mater Sci, 26: 100974. https://doi.org/10.1016/J.COSSMS.2021.100974

Avateffazeli M, Haghshenas M, 2022, Ultrasonic fatigue of laser beam powder bed fused metals: A state-of-the-art review. Eng Fail Anal, 134: 106015. https://doi.org/10.1016/J.ENGFAILANAL.2021.106015

Fu Y, Downey AR, Yuan L, et al., 2022, Machine learning algorithms for defect detection in metal laser-based additive manufacturing: A review. J Manuf Process, 75: 693–710. https://doi.org/10.1016/J.JMAPRO.2021.12.061

Liu Z, Zhao D, Wang P, et al., 2022, Additive manufacturing of metals: Microstructure evolution and multistage control. J Mater Sci Technol, 100: 224–236. https://doi.org/10.1016/J.JMST.2021.06.011

Selema A, Ibrahim MN, Sergeant P, 2022, Metal additive manufacturing for electrical machines: Technology review and latest advancements. Energies, 15: 1076. https://doi.org/10.3390/EN15031076

Hashmi AW, Mali HS, Meena A, et al., 2022, Surface characteristics improvement methods for metal additively manufactured parts: A review. Adv Mater Process Technol. https://doi.org/10.1080/2374068X.2022.2077535

Bandyopadhyay A, Ciliveri S, Bose S, 2022, Metal additive manufacturing for load-bearing implants. J Indian Inst Sci, 1021: 561–584. https://doi.org/10.1007/S41745-021-00281-X

Zhang K, Qu H, Guan H, et al., 2021, Design and fabrication technology of metal mirrors based on additive manufacturing: A review. Appl Sci, 11: 10630. https://doi.org/10.3390/APP112210630

Grasso M, Remani A, Dickins A, et al., 2021, In-situ measurement and monitoring methods for metal powder bed fusion: An updated review. Meas Sci Technol, 32: 112001. https://doi.org/10.1088/1361-6501/AC0B6B

Becker TH, Kumar P, Ramamurty U, 2021, Fracture and fatigue in additively manufactured metals. Acta Mater, 219: 117240. https://doi.org/10.1016/J.ACTAMAT.2021.117240

Ladani LJ, 2021, Applications of artificial intelligence and machine learning in metal additive manufacturing. J Phys Mater, 4: 042009. https://doi.org/10.1088/2515-7639/AC2791

Gunasegaram DR, Murphy AB, Matthews MJ, et al., 2021, The case for digital twins in metal additive manufacturing. J Phys Mater, 4: 040401. https://doi.org/10.1088/2515-7639/AC09FB

Ye C, Zhang C, Zhao J, et al., 2021, Effects of post-processing on the surface finish, porosity, residual stresses, and fatigue performance of additive Manufactured metals: A review. J Mater Eng Perform, 30: 6407–6425. https://doi.org/10.1007/S11665-021-06021-7

Velásquez-García LF, Kornbluth Y, 2021, Biomedical applications of metal 3D printing. Annu Rev Biomed Eng, 23: 307–338. https://doi.org/10.1146/ANNUREV-BIOENG-082020-032402

Mooraj S, Qi Z, Zhu C, et al., 2020, 3D printing of metal-based materials for renewable energy applications. Nano Res, 14: 2105–2132. https://doi.org/10.1007/S12274-020-3230-X

Ansell TY, 2021, Current status of liquid metal printing. J Manuf Mater Process, 5: 31. https://doi.org/10.3390/JMMP5020031

Sing SL, Kuo CN, Shih CT, et al., 2021, Perspectives of using machine learning in laser powder bed fusion for metal additive manufacturing. Virtual Phys Prototyp, 16: 372–386. https://doi.org/10.1080/17452759.2021.1944229

Galante R, Figueiredo-Pina CG, Serro AP, 2019, Additive manufacturing of ceramics for dental applications: A review. Dent Mater, 35: 825–846. https://doi.org/10.1016/J.DENTAL.2019.02.026

Du X, Fu S, Zhu Y, 2018, 3D printing of ceramic-based scaffolds for bone tissue engineering: An overview. J Mater Chem B, 6: 4397–4412. https://doi.org/10.1039/C8TB00677F

He R, Zhou N, Zhang K, et al., 2021, Progress and challenges towards additive manufacturing of SiC ceramic. J Adv Ceram, 10: 637–674. https://doi.org/10.1007/S40145-021-0484-Z

Pinargote NW, Smirnov A, Peretyagin N, et al., 2020, Direct ink writing technology (3D printing) of graphene-based ceramic nanocomposites: A review. Nanomater, 10: 1300. https://doi.org/10.3390/NANO10071300

Dommati H, Ray SS, Wang JJ, et al., 2019, A comprehensive review of recent developments in 3D printing technique for ceramic membrane fabrication for water purification. RSC Adv, 9: 16869–16883. https://doi.org/10.1039/C9RA00872A

Pelanconi M, Rezaei E, Ortona A, 2020, Cellular ceramic architectures produced by hybrid additive manufacturing: A review on the evolution of their design. J Ceram Soc Japan, 128: 595–604. https://doi.org/10.2109/JCERSJ2.20071

Dizon JR, Espera JH, Chen Q, et al., 2018, Mechanical characterization of 3D-printed polymers. Addit Manuf, 20: 44–67. https://doi.org/10.1016/J.ADDMA.2017.12.002

De Leon AC, Chen Q, Palaganas NB, et al., High performance polymer nanocomposites for additive manufacturing applications. React Funct Polym, 103: 141–155. https://doi.org/10.1016/J.REACTFUNCTPOLYM.2016.04.010

Manapat JZ, Chen Q, Ye P, et al., 2017, 3D Printing of polymer nanocomposites via stereolithography. Macromol Mater Eng, 302: 1600553. https://doi.org/10.1002/MAME.201600553

Balla VK, Kate KH, Satyavolu J, et al., 2019, Additive manufacturing of natural fiber reinforced polymer composites: Processing and prospects. Compos Part B Eng, 174: 106956. https://doi.org/10.1016/J.COMPOSITESB.2019.106956

Bracaglia LG, Smith BT, Watson E, et al., 3D printing for the design and fabrication of polymer-based gradient scaffolds. Acta Biomater, 56: 3–13. https://doi.org/10.1016/J.ACTBIO.2017.03.030

Ettefagh AH, Guo S, Raush J, 2021, Corrosion performance of additively manufactured stainless steel parts: A review. Addit Manuf, 37: 101689. https://doi.org/10.1016/J.ADDMA.2020.101689

Ko G, Kim W, Kwon K, et al., 2021, The corrosion of stainless steel made by additive manufacturing: A review. Metals, 11: 516. https://doi.org/10.3390/MET11030516

Eshkabilov S, Ara I, Sevostianov I, et al., 2021, Mechanical and thermal properties of stainless steel parts, manufactured by various technologies, in relation to their microstructure. Int J Eng Sci, 159: 103398. https://doi.org/10.1016/J.IJENGSCI.2020.103398

Klapczynski V, Le Maux D, Courtois M, et al., 2022, Surface tension measurements of liquid pure iron and 304L stainless steel under different gas mixtures. J Mol Liq, 350: 118558. https://doi.org/10.1016/J.MOLLIQ.2022.118558

Yuan X, Guo X, Qiu H, et al., 2022, Mechanical properties and microstructure of 316 stainless steel processed by pulsed micro-plasma additive manufacturing. J Therm Spray Technol, 31: 623–635.

https://doi.org/10.1007/S11666-022-01335-X/FIGURES/10

Voisin T, Shi R, Zhu Y, et al., 2022, Pitting corrosion in 316L stainless steel fabricated by laser powder bed fusion additive manufacturing: A review and perspective. JOM, 74: 1668–1689. https://doi.org/10.1007/S11837-022-05206-2/FIGURES/10

Douglas R, Lancaster R, Jones T, et al., 2022, The influence of powder reuse on the properties of laser powder bed-fused stainless steel 316L: A review. Adv Eng Mater, 24: 2200596. https://doi.org/10.1002/ADEM.202200596

Nedjad HS, Yildiz M, Saboori A, 2022, Solidification behaviour of austenitic stainless steels during welding and directed energy deposition. Sci Technol Welding Join, 27: 8. https://doi.org/10.1080/13621718.2022.2115664

Shao S, Khonsari MM, Guo S, et al., 2019, Overview: Additive manufacturing enabled accelerated design of ni-based alloys for improved fatigue life. Addit Manuf, 29: 100779. https://doi.org/10.1016/J.ADDMA.2019.100779

Haines MP, Rielli VV, Primig S, et al., 2022, Powder bed fusion additive manufacturing of Ni-based superalloys: A review of the main microstructural constituents and characterization techniques. J Mater Sci, 57: 14135–14187. https://doi.org/10.1007/S10853-022-07501-4

Markanday JFS, 2022, Applications of alloy design to cracking resistance of additively manufactured Ni-based alloys. Mater Sci Tech, 38: 1300–1314. https://doi.org/10.1080/02670836.2022.2068759

Guo C, Li G, Li S, et al., 2022, Additive Manufacturing of Ni-based superalloys: In: Residual stress, Mechanisms of Crack Formation and Strategies for Crack Inhibition, Nano Material Science. In Press. https://doi.org/10.1016/J.NANOMS.2022.08.001

Qian M, Xu W, Brandt M, et al., Additive manufacturing and postprocessing of Ti-6Al-4V for superior mechanical properties. MRS Bull, 41: 775–784. https://doi.org/10.1557/MRS.2016.215

Agius D, Kourousis KI, Wallbrink C, 2018, A review of the As-built SLM Ti-6Al-4V mechanical properties towards achieving fatigue resistant designs. Metals, 8: 75. https://doi.org/10.3390/MET8010075

Harun WS, Manam NS, Kamariah MS, et al., 2018, A review of powdered additive manufacturing techniques for Ti-6al-4v biomedical applications. Powder Technol, 331: 74–97. https://doi.org/10.1016/J.POWTEC.2018.03.010

Lyczkowska E, Szymczyk P, Dybała B, et al., 2014, Chemical polishing of scaffolds made of Ti-6Al-7Nb alloy by additive manufacturing. Arch Civ Mech Eng, 14: 586–594. https://doi.org/10.1016/J.ACME.2014.03.001

Tong J, Bowen CR, Persson J, 2016, Plummer, mechanical properties of titanium-based Ti–6Al–4V alloys manufactured by powder bed additive manufacture. Mater Sci Tech, 33: 138–148. https://doi.org/10.1080/02670836.2016.1172787

Carolo L, Ordoñez RE, 2022, A review on the influence of process variables on the surface roughness of Ti-6Al-4V by electron beam powder bed fusion. Addit Manuf, 59: 103103. https://doi.org/10.1016/J.ADDMA.2022.103103

Hölzl K, Lin S, Tytgat L, et al., 2016, Bioink properties before, during and after 3D bioprinting. Biofabrication, 8: 032002. https://doi.org/10.1088/1758-5090/8/3/032002

Derakhshanfar S, Mbeleck R, Xu K, et al., 2018, 3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances. Bioact Mater, 3: 144–156. https://doi.org/10.1016/j.bioactmat.2017.11.008

Schwab A, Levato A, D’Este M, et al., 2020, Printability and shape fidelity of bioinks in 3D bioprinting. Chem Rev, 120: 11028–11055. https://doi.org/10.1021/ACS.CHEMREV.0C00084/ASSET/ IMAGES/LARGE/CR0C00084_0009.JPEG

Lee JM, Yeong WY, Lee JM, et al., 2016, Design and printing strategies in 3D bioprinting of cell-hydrogels: A review. Adv Healthc Mater, 5: 2856–2865. https://doi.org/10.1002/ADHM.201600435

Vijayavenkataraman S, Lu WF, Fuh JY, 2016, 3D bioprinting of skin: A state-of-the-art review on modelling, materials, and processes. Biofabrication, 8: 032001. https://doi.org/10.1088/1758-5090/8/3/032001

Pereira RF, Bártolo PJ, 2015, 3D bioprinting of photocrosslinkable hydrogel constructs. J Appl Polym Sci, 132: 42458. https://doi.org/10.1002/APP.42458

Alonzo M, AnilKumar S, Roman B, et al., 2019, 3D Bioprinting of cardiac tissue and cardiac stem cell therapy. Transl Res, 211: 64–83. https://doi.org/10.1016/J.TRSL.2019.04.004

Yu C, Jiang J, 2020, A Perspective on using machine learning in 3D bioprinting. Int J Bioprinting, 6: 4–11. https://doi.org/10.18063/ijb.v6i1.253

Fetah K, Tebon P, Goudie MJ, et al., 2019, The emergence of 3D bioprinting in organ-on-chip systems. Prog Biomed Eng, 1: 012001. https://doi.org/10.1088/2516-1091/AB23DF

Kryou C, Leva V, Chatzipetrou M, et al., 2019, Bioprinting for liver transplantation. Bioengineering, 6: 95. https://doi.org/10.3390/BIOENGINEERING6040095

Adhikari J, Roy A, Das A, et al., 2021, Effects of processing parameters of 3D bioprinting on the cellular activity of bioinks. Macromol Biosci, 21: 2000179. https://doi.org/10.1002/MABI.202000179

Roussel N, Spangenberg J, Wallevik J, et al., 2020, Numerical simulations of concrete processing: From standard formative casting to additive manufacturing. Cem Concr Res, 135: 106075. https://doi.org/10.1016/J.CEMCONRES.2020.106075

Valente M, Sibai A, Sambucci M, 2019, Extrusion-based additive manufacturing of concrete products: Revolutionizing and remodeling the construction industry. J Compos Sci, 3: 88. https://doi.org/10.3390/JCS3030088

Du Plessis A, Babafemi AJ, Paul SC, et al., Biomimicry for 3D concrete printing: A review and perspective. Addit Manuf, 38: 101823. https://doi.org/10.1016/J.ADDMA.2020.101823

Ahmed ZY, Bos FP, van Brunschot MC, et al., 2020, On-demand additive manufacturing of functionally graded concrete. Virtual Phys Prototyp, 15: 194–210. https://doi.org/10.1080/17452759.2019.1709009

van de Werken N, Tekinalp H, Khanbolouki P, et al., 2020, Additively manufactured carbon fiber-reinforced composites: State of the art and perspective. Addit Manuf, 31: 100962. https://doi.org/10.1016/J.ADDMA.2019.100962

Li M, Pu Y, Thomas VM, et al., 2020, Recent advancements of plant-based natural fiber–reinforced composites and their applications. Compos Part B Eng, 200: 108254. https://doi.org/10.1016/J.COMPOSITESB.2020.108254

Shanmugam V, Rajendran DJ, Babu K, et al., 2021, The mechanical testing and performance analysis of polymer-fibre composites prepared through the additive manufacturing. Polym Test, 93: 106925. https://doi.org/10.1016/J.POLYMERTESTING.2020.106925

Ferreira I, Machado M, Alves F, et al., 2019, A review on fibre reinforced composite printing via FFF. Rapid Prototyp J, 25: 972–988. https://doi.org/10.1108/RPJ-01-2019-0004/FULL/PDF

Ramesh M, Rajeshkumar L, Balaji D, 2021, Influence of process parameters on the properties of additively manufactured fiber-reinforced polymer composite Materials: A review. J Mater Eng Perform, 30: 4792–4807. https://doi.org/10.1007/S11665-021-05832-Y/FIGURES/10

Goh GL, Zhang H, Chong TH, et al., 2021, 3D Printing of multilayered and multimaterial electronics: A review. Adv Electron Mater, 7: 2100445. https://doi.org/10.1002/AELM.202100445

Mehrpouya M, Tuma D, Vaneker T, et al., 2022, Multimaterial powder bed fusion techniques. Rapid Prototyp J, 28: 1–19. https://doi.org/10.1108/RPJ-01-2022-0014/FULL/PDF.

Rocha VG, Saiz E, Tirichenko IS, et al., 2020, Direct ink writing advances in multi-material structures for a sustainable future. J Mater Chem A, 8: 15646–15657. https://doi.org/10.1039/D0TA04181E

Pajonk A, Prieto A, Blum U, et al., Multi-material additive manufacturing in architecture and construction: A review. J Build Eng, 45: 103603. https://doi.org/10.1016/J.JOBE.2021.103603

García-Collado A, Blanco JM, Gupta MK, et al., 2022, Advances in polymers based multi-material additive-manufacturing techniques: State-of-art review on properties and applications. Addit Manuf, 50: 102577. https://doi.org/10.1016/J.ADDMA.2021.102577

Peterson AM, 2019, Review of acrylonitrile butadiene styrene in fused filament fabrication: A plastics engineering-focused perspective. Addit Manuf, 27: 363–371. https://doi.org/10.1016/J.ADDMA.2019.03.030

Chen X, Chen G, Wang G, et al., Recent progress on 3D-printed polylactic acid and its applications in bone repair. Adv Eng Mater, 22: 1901065. https://doi.org/10.1002/ADEM.201901065.

Mehrpouya M, Vahabi H, Janbaz S, et al., 2021, 4D printing of shape memory polylactic acid (PLA). Polymer (Guildf), 230: 124080. https://doi.org/10.1016/J.POLYMER.2021.124080

Cojocaru V, Frunzaverde V, Miclosina CO, et al., 2022, The influence of the process parameters on the mechanical properties of PLA specimens produced by fused filament fabrication— A review. Polymers, 14: 886. https://doi.org/10.3390/POLYM14050886

El Magri A, Vanaei S, Vaudreuil S, 2021, An overview on the influence of process parameters through the characteristic of 3D-printed PEEK and PEI parts. High Performance Polym, 33: 862–880. https://doi.org/10.1177/09540083211009961

Dua R, Rashad Z, Spears J, et al., Applications of 3D-printed PEEK via fused filament fabrication: A systematic review. Polymers, 13: 4046. https://doi.org/10.3390/POLYM13224046

Ding Y, Muñiz-Lerma JA, Trask M, et al., 2016, Microstructure and mechanical property considerations in additive manufacturing of aluminum alloys. MRS Bull, 41: 745–751. https://doi.org/10.1557/MRS.2016.214

Ponnusamy P, Rashid RA, Masood SH, et al., 2020, Mechanical properties of SLM-printed aluminium alloys: A review. Materials, 13: 4301. https://doi.org/10.3390/MA13194301

Fiocchi J, Tuissi A, Biffi CA, 2021, Heat treatment of aluminium alloys produced by laser powder bed fusion: A review. Mater Des, 204: 109651. https://doi.org/10.1016/J.MATDES.2021.109651

Thapliyal S, 2019, Challenges associated with the wire arc additive manufacturing (WAAM) of aluminum alloys. Mater Res Express, 6: 112006. https://doi.org/10.1088/2053-1591/AB4DD4

Revilla RI, Verkens D, Rubben T, et al., 2020, Corrosion and corrosion protection of additively manufactured aluminium alloys-a critical review. Materilas, 13: 4804. https://doi.org/10.3390/MA13214804

Jiang Q, Zhang P, Yu Z, et al., 2021, A review on additive manufacturing of pure copper. Coatings, 11: 740. https://doi.org/10.3390/COATINGS11060740

Portanguen S, Tournayre P, Sicard J, et al., 2019, Toward the design of functional foods and biobased products by 3D printing: A review. Trends Food Sci Technol, 86: 188–198. https://doi.org/10.1016/J.TIFS.2019.02.023

Wang M, Li D, Zang Z, et al., 2021, 3D food printing: Applications of plant-based materials in extrusion-based food printing. Crit Rev Food Sci Nutr, 6: 7184–7198. https://doi.org/10.1080/10408398.2021.1911929

Li G, Hu L, Liu J, et al.,2022, A review on 3D printable food materials: Types and development trends. Int J Food Sci Technol, 57: 164–172. https://doi.org/10.1111/IJFS.15391

Navaf M, Sunooj KV, Aaliya B, et al., 2022, 4D printing: A new approach for food printing; effect of various stimuli on 4D printed food properties. A comprehensive review. Appl Food Res, 2: 100150. https://doi.org/10.1016/J.AFRES.2022.100150

Haleem A, Javaid M, Singh RP, et al., 2021, Significant roles of 4D printing using smart materials in the field of manufacturing. Adv Ind Eng Polym Res, 4: 301–311. https://doi.org/10.1016/J.AIEPR.2021.05.001

Kwon JY, Park HE, Park YB, et al., 2017, Potentials of additive manufacturing with smart materials for chemical biomarkers in wearable applications. Int J Precis Eng Manuf Technol, 4: 335–347. https://doi.org/10.1007/S40684-017-0039-5

Liu H, Jiang Q, Huo J, et al., 2020, Crystallization in additive manufacturing of metallic glasses: A review. Addit Manuf, 36: 101568. https://doi.org/10.1016/J.ADDMA.2020.101568

Zhang H, Huang L, Tan M, et al., Overview of 3D-printed silica glass. Micromachines, 13: 81. https://doi.org/10.3390/MI13010081

Das AK, Agar DA, Rudolfsson M, et al., 2021, A review on wood powders in 3D printing: Processes, properties and potential applications. J Mater Res Technol, 15: 241–255. https://doi.org/10.1016/J.JMRT.2021.07.110

Wang C, Tan XP, Tor SB, et al., 2020, Machine learning in additive manufacturing: State-of-the-art and perspectives. Addit Manuf, 36: 101538. https://doi.org/10.1016/J.ADDMA.2020.101538

Liu J, Gaynor AT, Chen S, et al., 2018, Current and future trends in topology optimization for additive manufacturing. Struct Multidiscip Optim, 57: 2457–2483. https://doi.org/10.1007/s00158-018-1994-3

Ambrosi A, Pumera M, 2016, 3D-printing technologies for electrochemical applications. Chem Soc Rev, 45: 2740–2755. https://doi.org/10.1039/C5CS00714C

Truby Rl, Lewis JA, 2016, Printing soft matter in three dimensions. Nature, 540: 371–378. https://doi.org/10.1038/nature21003

Trenfield SJ, Awad A, Goyanes A, et al., 3D printing pharmaceuticals: Drug development to frontline care. Trends Pharmacol Sci, 39: 440–451. https://doi.org/10.1016/J.TIPS.2018.02.006

Uriondo A, Esperon-Miguez M, Perinpanayagam S, 2022, The present and future of additive manufacturing in the aerospace sector: A review of important aspects. Proceed Inst Mech Eng G J Aerospace Eng, 229: 2132–2147. https://doi.org/10.1177/0954410014568797




DOI: http://dx.doi.org/10.18063/msam.v1i4.21

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Author(s)

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.